>> 福禄克分类
数字万用表
地址:广州市荔湾区花地南路西塱麦村北约55号308房
联系人:
电话:020-83709568
传真:020-83709252
邮箱:Email:mitek@21cn.com

Fluke 233/A Remote Display

Fluke
The Fluke 233/A Remote Display Automotive Digital Multimeter Kit allows you to be in two places at once. The removable display solves the problems of holding both the meter and the test leads to make a measurement. The Fluke 233/A kit works on either conventional or hybrid vehicles.
 

Imagine the possibilities
What would you do if you could be in two places at once?
By simply sliding the wireless display out of the Fluke 233/A’s meter body, the technician can place the display where it is most easily seen—up to 10 meters (33 feet) from the point of measurement—while putting the meter in the best position to take measurements. The removable display has a magnetic back and flat bottom so it can be mounted or placed on any flat surface where it can be conveniently seen. When the display is attached to the meter body the Fluke 233/A operates as a conventional multimeter.
The detachable wireless display lets automotive technicians:
Find a comfortable position to view and record test data, even when the test location is hard to reach or in a dirty or noisy environment.
Attached test leads to brake lights while sitting in the driver seat, pressing the brake pedal and viewing the display.
Safely view underhood measurements on moving vehicles.
Separate the tasks of positioning the meter and reading test results, devoting full attention to each job—and working more safely.
Run tests and read results at a safe distance from high-voltage, high-current systems. The Fluke 233 is safety rated for use in CAT III 1000V, CAT IV 600V working environments, important for technicians working on hybrid vehicles.
Designed by Fluke engineers and manufactured at the Fluke Worldwide headquarters in Everett, Washington, the Fluke 233 is safety rated for use in CAT III 1000V, CAT IV 600V working environments. This is important for technicians working on hybrid vehicles, which routinely work with high-voltage, high-current systems not found on conventional vehicles.

特点

  • 真有效值交流电压和电流,确保精确测量各种非线性信号
  • 可以测量高达 1000 V 的交流电和直流电
  • 可以测量高达 10A 的电流(20 A,持续 30 秒)
  • 10,000 μF 电容量程
  • 频率可达 50 kHz
  • 内置测温表,无需携带单独的仪器即可获取温度读数
  • 电阻、连续性和二极管测试
  • 低耗能无线技术允许把显示屏放在离测量点 10 米(33 英尺)远的地方,提高了测量灵活性。 无干扰的测量
  • 可拆卸的磁性显示屏可以方便地安放在容易查看的位置
  • 无需拿着多用表进行测量,可以改善对探头的关注度并提高了电气测量的安全性
  • 连接显示屏后可以用作传统的多用表
  • 当显示屏连接到多用表时,无线电发射器自动关闭
  • 自动关机功能最大化电池寿命
  • 最小值/最大值和平均值记录允许自动捕获异常情况
  • 测试连续性和二极管
  • 大型数字和背光方便读取数值
  • 电池寿命约为 400 小时
准确度技术指标
DC 电压
量程 0.1 mV 至 1000 V
准确度 0.25 % + 2
AC 电压
量程 0.1 mV 至 1000 V
准确度 1.0 % + 3
DC 电流
量程 1 mA 至 10 A
准确度 1.0 % + 3
AC 电流
量程 1 mA 至 10 A
准确度 1.5 % + 3
电阻
量程 0.1 Ω 至 40 MΩ
点数

6000
电容
量程: 1 nF 至 9999 μF
辨率: 1nF
频率
量程: 5 Hz 至 50 kHz
辨率: 0.01Hz
温度

-40 °C 至 +400 °C
安全等级

CAT IV 600 V , CAT III 1000 V

 

常规技术指标
基本功能
AC 真有效值  是
量程调整  自动/手动
显示屏
可移动显示
 是
背光  是
数据存储
最小值 / 最大值 / 平均值  是
电源
AA 电池: 主机 3 节;显示屏 2 节
电池寿命
400 小时
无线频率
 2.4 GHz ISM 波段,10 米范围内
其它功能
电池类型  AA 碱性电池
保修和防护
安全等级 CAT IV 600 V/CAT III 1000 V
外部防护  橡胶覆膜
保修 3 年
尺寸(高 x 宽 x 长) 5.3 x 9.3 x 19.3 厘米 (2.08 x 3.6 x 7.6 英寸)
重量 604 克 (1.3 磅)
型号名称 描述
Fluke 233/A Remote Display Automotive Digital Multimeter Kit

机套和挂件
C35 柔软便携包
TPAK ToolPak™

温度
80AK-A 热电偶适配器
版权所有:Copyright(c)2006-2016 www.gzmitek.net All Rights Reserved 粤IPC备:ICP备案号:12040973号-3
地址:广州市荔湾区花地南路西塱麦村北约55号308房 电话:020-83709568 传真:020-83709252 邮箱:Email:mitek@21cn.com